Hepa Filters and Air Filtration Systems For a Variety Of Contamination Control Applications

CleanAir Solutions, Inc. offers a wide range of hepa air filters and air filtration systems for a variety of contamination control applications and modular, hardwall, and softwall clean room environments. Our cleanroom specialists will create and design an air filtration system with premium hepa filters and effective air filtration systems to ensure your cleanroom operates with the most advanced equipment available in the industry.

Terminal-End Units: Terminal HEPA/ULPA filter modules are designed to provide unidirectional airflow from tee-bar ceilings. Standard air filtration modules come in 24 in. x 24 in. and 24 in. x 48 in. sizes with either 10 in. or 12 in. diameter collars. The HEPA air filter efficiency is rated at 99.99% at 0.3 microns and the ULPA air filter efficiency is rated at 99.9995% at 0.12 microns. Hepa air filters are available in three filter pack depths: 53, 70, and 100 mm.

Fan-Powered Units: Self-powered air filter modules have become a popular substitute for terminal air filtration units because of their flexibility and ease of installation. Our fan/filter units include variable speed control, choice of power cord or junction box and quick-release latches that permit rapid replacement of the air filter media. Most clean room supply and contamination control companies offer these air filter options as a premium, but we offer them as a standard. You can also choose from 115V, 277V or export voltages to meet your electrical needs. To make sure your clean room air filters are running at all times, power indicator lights are also available for room side monitoring.

We offer hundreds of air filter special sizes to meet your cleanroom requirements. Whether you require just one filter unit or hundreds, we can fill your custom specifications.

Low-Profiled Units: Room in a room applications sometimes make it difficult to fit a standard size air fan/filter module above the room. Typical office t-bar is hung at 9 feet above the finished clean room floor. To place a cleanroom within that envelope at a minimum 7’ inside ceiling height only leaves 24” of interstitial space. This is a perfect application for low-profile air filtration modules. Low-profile air filter modules are designed with dual motorized impellers to provide a slim package with an overall height of only 9.5 inches.

Prefilters: Prefilters are strong, high quality moisture resistant extended surface pleat cleanroom air filters designed to operate in most every type of installation. Available in 1 in., 2in., and 4 in. nominal thickness, these air filters have an average atmospheric dust spot efficiency range of 25 – 30% per ASHRAE Standard 52.1 test methods. Pleated air filters offer a greater efficiency and service life than disposable air filters, pad and frame air filtration systems or metal washable air filters. The overall design of this product makes these air filters the accepted choice in high performance clean room applications.

AirLink Controls:  Airlink Control Systems are designed to control SAM units from a remote console or panel. Linked individually or in groups, an operator can increase or reduce airflow to a selected area and utilize the

set back feature during off-peak hours, resulting in lower operating costs. Our exclusive state-of-the-art, reasonably priced fan filter control systems utilize our standard 115 volt and 277 volt, motor blower units without using high cost DC motors. Depending upon the number of units required and local electricity rates, payback is often one year or less.

Please contact one of our environmental service / clean room specialists at CAS to request a no-obligation quote on any of our hepa filter products or air filtration systems.